Product ID:1685-SERIES DURA-POXY SEMI-GLOSS ACRYLIC ENAMEL ALL COLORS
MSDS Date:03/05/1990
FSC:8010
NIIN:00F026084
MSDS Number: BQHKZ

KELLY-MOORE PAINT CO INC

1015 COMMERCIAL ST
SAN CARLOS, CA 94070
US

Info Phone: 415-592-8337

Preparer: M SCHEFER

Cage: 0Y837

KELLY-MOORE PAINT CO INC

SAN CARLOS, CA 94070 US

Telephone: 650-592-8337

Cage: 0Y837

2-(2-BUTOXYETHYOXY)-ETHANOL, DIETHYLENE GLYCOL MONOBUTYL

CAS: 112-34-5

RTECS: KJ9100000

Fraction By Weight: <5%

PROPANOIC ACID, 2-METHYL, MONOESTER

CAS: 25265-77-4

RTECS: UF6000000

Fraction By Weight: <5%

HEXYLENE GLYCOL, 2-METHYL-2,4-PENTANEDIOL

CAS: 107-41-5

RTECS: SA0810000

Fraction By Weight: <5%

OSHA PEL 25 PPM

ACGIH TLV: C 21 MG/CUM

1-(3-CHLOROALLYL)-3,5,7-TRIAZA-1-AZONIAADAMANTANE CHLORIDE,

CAS: 4080-31-3

RTECS: XX8450000

8-11 LBS

RTECS: 9999999WG

TITANIUM DIOXIDE, TIO2

CAS: 13463-67-7

RTECS: XR2275000

OSHA PEL 15 MG/M3 TDUST

ACGIH TLV: 10 MG/M3 TDUST; 9293

SILICATES

Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INHALATION: DIZZINESS, HEADACHE,
NAUSEA, CONFUSION, UPPER RESPIRATORY TRACT IRRITATION,
UNCONSCIOUSNESS. SKIN/EYES: IRRITATION.
Explanation of Carcinogenicity:NONE
Medical Cond Aggravated by Exposure:SEE YOUR PHYSICIAN FOR SPECIFIC
MEDICAL OPINION REGARDING YOUR CONDITION.

First Aid:INHALATION: REMOVE TO FRESH AIR. RESTORE BREATHING. EYES:
WASH W/PLENTY OF WATER FOR AT LEAST 15 MINS. SKIN: WIPE OFF W/RAG.
WASH THOROUGHLY W/SOAP & WATER. INGESTION: OBTAIN MEDICAL ATTENTION
IN ALL CASES.

Flash Point:>200F
Unusual Fire/Explosion Hazard:CLOSED CONTAINERS MAY EXPLODE (DUE TO
BUILD UP OF STEAM PRESSURE) WHEN EXPOSED TO EXTREME HEAT.

Spill Release Procedures:VENTILATE AREA TO PREVENT BUILD-UP OF VAPORS.
FOR SMALL SPILLS: SOAK UP W/ABSORBENT. FOR LARGER SPILLS: DIKE AREA
W/ABSORBENT MATERIAL & SCOOP UP LIQUIDS.

Handling and Storage Precautions:STORE UPRIGHT IN SEALED CONTAINERS
AWAY FROM HEAT & FLAME.
Other Precautions:AVOID CONTACT W/SKIN/EYES & CLOTHES. AVOID BREATHING
SPRAY MIST OR DUST.

Respiratory Protection:USE PARTICLE MASK TO AVOID BREATHING SPRAY MIST
OR DUST. USE APPROVED RESPIRATOR FOR ORGANIC VAPOR, SUPPLIED AIR OR
SELF-CONTAINED BREATHING EQUIPMENT.
Ventilation:LOCAL EXHAUST TO KEEP BELOW TLV.
Protective Gloves:RECOMMENDED
Eye Protection:GOGGLES OR GLASSES W/SHIELDS
Work Hygienic Practices:REMOVE & WASH CONTAMINATED CLOTHES BEFORE
REUSE. WASH HANDS THOROUGHLY AFTER HANDLING.
Supplemental Safety and Health
PRODUCT MAY CONTAIN TITANIUM DIOXIDE OR SILICATES THAT MAY BE NUISANCE
DUST HAZARDS IN THEIR ORIGINAL DRY POWDER FORM BUT ARE NOT
HAZARDOUS IN WET PAINT.

Boiling Pt:B.P. Text:212F
Vapor Density:<1
Evaporation Rate & Reference:SLOWER THAN ETHER
Percent Volatiles by Volume:62-72%

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS
Stability Condition to Avoid:HEAT
Hazardous Decomposition Products:MAY PRODUCE HAZARDOUS FUMES WHEN
HEATED TO DECOMPOSITION AS IN WELDING.

Waste Disposal Methods:DISCARD IN LAND FILL IN SEALED METAL CONTAINERS
AWAY FROM HEAT & FLAME & IN ACCORDANCE W/LOCAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.